Standard ATC ATO Regular 19x19x4mm Automotive Style Auto Blade Fuse 10A 32V Red For Auto Fuse Holder Tap Adapter

Standard ATC ATO Regular 19x19x4mm Automotive Style Auto Blade Fuse 10A 32V Red For Auto Fuse Holder Tap Adapter

Ordering Information

Blown/Melting Features

Structure Dimension

Other specification

Application Examples -- 16AWG Add A Circuit Standard ATC ATO Regular Blade Style Fuse Holder Tap

a. Add-a-circuit mini style blade fuse holder. Turns one fuse slot into two ! 
b. Allows easy installation of additional circuits without cutting, splicing or soldering.
c. Push into an existing fuse holder. Protects original circuit and provides a wire lead for the new circuit.
d. Provides one fuse holder to protect existing circuit, and a second fuse holder to protect new circuit.
e. Ideal replacement fuse holder for auto, car, truck, boat, etc.

f. This dual slot Add-A-Circuit/Add-A-Line/Fuse Socket provides a fuse slot for the existing OEM circuit and a second slot for a new circuit for a mobile electronic devices/accessories such as a mobile phone, radio, mobile accessories, etc.

Installation Guide:

I. Turn Off the ignition switch, and locate your fusebox and particular fuse to be used.
II. Remove the fuse from the slot you will be using.
III. Insert fuse from existing slot into botton of the fuse tap.
IV. Insert fuse tap into the original fuse slot which provides power to your new Accessory/Devices.
V. Power your new devides by connceting the open and of the fuse tap to your new Accessory/Devices.

NOTICE:Please replace the fuse according to the rated current value indicated on the fuse box cover. Do not use a fuse with a higher rated current.If the new fuse melted after installed, then the circuit system need to be tested and should be repaired as soon as possible.