Radial Leaded Epoxy Coated Thermometrics NTC Thermistor 10KOhm 3950 1% For Air Conditioning

Radial Leaded Epoxy Coated Thermometrics NTC Thermistor 10KOhm 3950 1% For Air Conditioning

Dimension    (mm)

______________________________________________________________________________ Download________

Application

Temperature Sensing
Temperature Detection
Transformers
Electric Motors

Automotive engine management
Air conditioning
Medical
Clinical thermometers
Blood analysis

Description

NTC thermistor in Radial Leaded, Epoxy Resin coated form, Standard pin wire is tinned copper brass wire, non-insulated, optional in tinned kinked steel wire, PVC wire, PTFE wire. Widely applied in temperature sensing, measurement, detection, indicator, monitoring, gauging, control, calibration and compensation, etc., suitable for HVAC and white goods, automotive, battery pack application.

Features

Interchangeability options down to ±0.1C accuracy 0 to 100ºC range

Head size 0.8 to 2.4mm

Automated assembly

Low cost, solid state temperature sensor
Suitable for use over range of -112ºF to 302ºF (-80ºC to 150ºC)
High sensitivity greater than -4% /ºC at 77ºF (25ºC)
Suitable for temperature measurement, control, and compensation
High reliability and stability
Resin coated for good mechanical strength and resistance to solvents

Electrical Performances

NO	Item	Sign	Test Conditions	Performance requirements	Unit
4-1.	Resistance at 25℃	R25	Ta=25±0.05℃ PT≦0.1mw	10KΩ±1%	K
4-2.	B Value	B25/50		3950	k
4-3.	Dissipation factor	σ	Ta=25±0.5℃	≥2	mw/℃
4-4.	Time constant	τ	Ta=25±0.5℃	≤7	sec
4-5.	Insulation resistance	/	100VDC 1min	≥100	MΩ
4-6.	NTC Operating temp.range	/	/	-40 ~ +80	℃
4-7.	Assembly Operating temp.range	/	/	-20 ~ +80	℃

Reliability Tests

Radial Leaded, Epoxy Resin Coated NTC thermistor Mechanical Test