350 V 3 Electrode Gas Discharge Tubes SMD GDTs 6x8mm 3 Pole

350 V 3 Electrode Gas Discharge Tubes SMD GDTs 6x8mm 3 Pole Gas Plasma Arrestors

Features

■ Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs.

■ Stable breakdown voltage.

■ High insulation resistance.

■ Low capacitance (≤2pF)

■ High holdover voltage

■ Large absorbing transient current capability.

■ Micro-Gap Design

■ Size: 6.0mm*8mm

■ Storage and operational temperature: -40℃ ~ +85℃

■ Meets MSL level 1, per J-STD-020

■ Safety certification: UL: E244458

General

AOLITTEL's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data transmission lines to help protect them from damage caused by transient surge voltages that may result from lightning strikes and equipment switching operations. These devices do not influence the signal in normal operation. However, in the event of an overvoltage surge, such as a lightning strike, the GDT switches to a low impedance state and diverts the energy away from the sensitive equipment.
Our GDTs offer a high level of surge protection, a broad voltage range, low capacitance, and many form factors including new surface mount devices, which makes them suitable for applications such as Main Distribution Frame (MDF) modules, high data-rate telecom applications (e.g. ADSL, VDSL), and surge protection on power lines. Their low capacitance also results in less signal distortion. When used in a coordinated circuit protection solution with PolySwitch devices, they can help equipment manufacturers meet stringent safety regulatory standards.

Applications

■ Repeaters, Modems.

■ Telephone Interface, Line cards.

■ Data communication equipment.

■ Line test equipment

Part Number Code

Gas Discharge Tubes - SE3 Series

SE33 - 230X  F

SE3  Series: SE3:ф6*8   SE8:ф8*10

3 : Lead Type: 0=SMD 3=Thrust

230X : DC Line Voltage: 90X=90V 230X=230V 102X=1000V

F: Package F=With Fail-Short mechanism

BENEFITS

• Helps provide overvoltage fault protection against damage caused by high energy surges

• Suitable for use in sensitive equipment due to impulse sparkover response

• Suitable for high-frequency applications

• Highly reliable performance

• New surface-mount devices for automated manufacturing

Installation for Gas Discharge Tubes

Care should be taken when installing GDTs equipped with fail-short mechanisms into arrester magazines, printed circuit boards, etc. Too much downward pressure may force the short circuit spring through the thin insulation tube creating a shorted condition.

Solder Reflow Recommendations for Surface-mount GDT Devices

Surface-mount GDTs can be soldered using standard Pb-free reflow profiles.

Dimensions

33 Type

33-F Type

30 Type

Electrical Characteristics

Recommended Soldering Conditions

Packaging

Axial Packing (Bulk)

SMD Packing (Tape & Reel)

Smart Home Application

Intelligent household appliances , mixing the Internet technology and IT technology, functioning with the smart controlling, Infrared sensing, RF automatic identification and automatic scanning, is common and popular in people’s daily life. Aolittel Electronics will provide the electronic components such as ceramic gas discharge tube, transient voltage suppressor and ESD suppressor,which are widely used in the this field